Diy Mid Century Planter Stand

Diy Mid Century Planter Stand. Place the base stand on a smooth surface. You will start this project by measuring you planter.

$3 Diy Mid-Century Modern Plant Stand With Free Plans! – Lrn2Diy
$3 Diy Mid-Century Modern Plant Stand With Free Plans! – Lrn2Diy from lrn2diy.com

Repeat this process if you decide to make another mini mid century plant stand! After the glue dries, drill clearance holes. A quick and easy diy project that is similar to the wooden west elm mid century planter stand.

From One End Of The Legs (A).

One length will make an “x” across the bottom of the planter for the planter to sit on. This one is easy, quick and a great wa. The best way to put up christmas lights.

See also  Diy Plant Stand Pdf

Add How High You Want The Planter To Sit Up Off The Ground With How High You Want The.

The other length will be the side legs for your plant stand. I guess the $169 isn’t so bad because it’s a planter and a plant stand, so really that’s two for one. You will want to measure the height, width and depth of the planter.

Kregjig And 1 ¼” Pocket Hole Screws.

The ikea ones pictured are currently sold out, but you can use these similar ones. Total cost including stain & sealer: The mortise and tenon joints will secure due to the glue.

If You Like This Look, Check Out These Diy Concrete Planters.

November 14, 2018 at 8:28 pm. If you have a jigsaw and scrap lumber, you can cut your own circles like i did for this other plant stand project. Diy mid century modern plant stand/ planter.

Same Paint I Used For The Diy Modern “Steel” Planter.

Take the 7/8 inch dowel rods and cut it into four 19 inch pieces. All set for the stage! You will start this project by measuring you planter.

You May Also Like

About the Author: admin

Leave a Reply

Your email address will not be published.